ThreadPool.Simple API Documentation

uses
  {$IFDEF UNIX}cthreads,{$ENDIF}  // must be first on Unix-like systems
  ThreadPool.Simple;

See the official FPC documentation on cthreads.

v0.9 observable Submit tasks, batches, ranges, and pending cancellation are documented in the ThreadPool.Tasks API. The queueing surface below remains unchanged.

Thread Pool Types#

GlobalThreadPool#

A ready-to-use singleton instance declared in the ThreadPool.Simple unit.

Created automatically at program startup — do not call GlobalThreadPool.Free
Uses the default thread count (ProcessorCount, minimum 4)
Suitable for most applications

uses ThreadPool.Simple;

GlobalThreadPool.Queue(@MyProcedure);
GlobalThreadPool.WaitForAll;

The timeout overload returns False if work remains after the requested number of milliseconds:

if not GlobalThreadPool.WaitForAll(250) then
  WriteLn('Still running');

0 is an immediate check. THREADPOOL_INFINITE waits indefinitely.

WaitForAll does not close admission. Coordinate concurrent producers first, or use Shutdown to atomically stop admission before draining.

TSimpleThreadPool#

A manually managed pool for when you need explicit control over thread count or lifetime.

Create with TSimpleThreadPool.Create(AThreadCount)
Thread count is clamped: minimum 4, maximum 2× ProcessorCount
Multiple independent pools can coexist
Must be freed by the caller

uses ThreadPool.Simple;

var
  Pool: TSimpleThreadPool;
begin
  Pool := TSimpleThreadPool.Create(4);
  try
    Pool.Queue(@MyProcedure);
    Pool.WaitForAll;
  finally
    Pool.Free;
  end;
end;

---

Queue Overloads#

All four Queue overloads are thread-safe and can be called from any thread.

// 1. Plain procedure — no shared state needed
GlobalThreadPool.Queue(@MyProcedure);

// 2. Object method — task needs access to object fields
GlobalThreadPool.Queue(@MyObject.MyMethod);

// 3. Indexed procedure — loop parallelism
GlobalThreadPool.Queue(@MyIndexedProcedure, 42);

// 4. Indexed method — loop parallelism + object state
GlobalThreadPool.Queue(@MyObject.MyIndexedMethod, 42);

Type signatures (from `ThreadPool.Types`)#

TThreadProcedure      = procedure;
TThreadMethod         = procedure of object;
TThreadProcedureIndex = procedure(index: Integer);
TThreadMethodIndex    = procedure(index: Integer) of object;

---

WaitForAll#

Blocks the calling thread until every queued task has finished executing.

GlobalThreadPool.WaitForAll;

Always call WaitForAll before:

Reading results written by worker tasks
Freeing objects whose methods were queued
Calling LastError

---

Error Handling#

Worker thread exceptions are caught automatically and stored in LastError. The pool continues processing remaining tasks after an exception.

var
  Pool: TSimpleThreadPool;
begin
  Pool := TSimpleThreadPool.Create(4);
  try
    Pool.Queue(@RiskyProcedure);
    Pool.WaitForAll;

    if Pool.LastError <> '' then
    begin
      // LastError holds the raw exception message of the most recent failure.
      WriteLn('Error: ', Pool.LastError);
      Pool.ClearLastError;  // Reset before reusing the pool
    end;
  finally
    Pool.Free;
  end;
end;

Collecting all errors (v0.7.0)#

LastError only holds the most recent failure. To inspect every task error, use the Errors collection (oldest first, capped at MAX_STORED_ERRORS = 1000):

var
  Msg: string;
begin
  Pool.ClearErrors;
  for i := 0 to N - 1 do
    Pool.Queue(@RiskyProcedure);
  Pool.WaitForAll;

  WriteLn(Pool.ErrorCount, ' task(s) failed:');
  for Msg in Pool.Errors do
    WriteLn('  - ', Msg);

  Pool.ClearErrors;  // resets the collection and LastError
end;

Reacting to errors as they happen (v0.7.0)#

Assign OnError to be notified the moment a task fails, instead of polling after WaitForAll:

type
  TMyHandler = class
    procedure OnTaskError(const AMessage: string);
  end;

procedure TMyHandler.OnTaskError(const AMessage: string);
begin
  // NOTE: called synchronously from a worker thread. Keep it short, bounded,
  // and thread-safe; synchronize if you touch the UI or shared state.
  Log('task failed: ' + AMessage);
end;

Pool.OnError := @Handler.OnTaskError;

Exceptions raised by the handler are contained by the pool. They cannot terminate a worker or prevent task completion accounting.

Containment does not limit callback execution time. A task or OnError handler that blocks continues to occupy its worker, and can delay WaitForAll and Shutdown. Apply an application-level timeout or cancellation mechanism to operations that may block.

Lifecycle and submission timeouts (v0.8.0)#

TSimpleThreadPool is unbounded, so TryQueue normally succeeds immediately; the timeout argument exists so code can use either pool through IThreadPool. After shutdown begins, Queue and TryQueue raise EThreadPoolShutdown.

Pool.TryQueue(@MyProcedure, 0);
Pool.Shutdown; // stop admission, drain accepted work, join workers

State progresses once from tpsAccepting to tpsDraining to tpsStopped. Shutdown is idempotent and destruction calls it automatically.

Properties#

property LastError: string;            // Raw message of the most recent worker exception
property Errors: TStringArray;         // All captured messages (oldest first, capped)
property ErrorCount: Integer;          // Number of messages currently in Errors
property OnError: TThreadPoolErrorEvent; // Fired (on a worker thread) per failed task
property ThreadCount: Integer;         // Number of worker threads (read-only)
property State: TThreadPoolState;       // Accepting, draining, or stopped

Methods#

procedure Queue(AProcedure: TThreadProcedure);
procedure Queue(AMethod: TThreadMethod);
procedure Queue(AProcedure: TThreadProcedureIndex; AIndex: Integer);
procedure Queue(AMethod: TThreadMethodIndex; AIndex: Integer);
function TryQueue(...; ATimeoutMS: Cardinal): Boolean; // four matching overloads
procedure WaitForAll; overload;
function WaitForAll(ATimeoutMS: Cardinal): Boolean; overload;
procedure Shutdown;
procedure ClearLastError;
procedure ClearErrors;  // clears both Errors and LastError

---

Usage Examples#

1. Simple procedure#

procedure PrintHello;
begin
  WriteLn('Hello from thread ', GetCurrentThreadId);
end;

begin
  GlobalThreadPool.Queue(@PrintHello);
  GlobalThreadPool.WaitForAll;
end;

2. Object method#

Warning: do not free MyObject until after WaitForAll returns. Worker threads hold a reference to the object's method and will crash if the object is freed while they are still running.

type
  TMyClass = class
    procedure ProcessData;
  end;

procedure TMyClass.ProcessData;
begin
  WriteLn('Processing in thread ', GetCurrentThreadId);
end;

var
  MyObject: TMyClass;
begin
  MyObject := TMyClass.Create;
  try
    GlobalThreadPool.Queue(@MyObject.ProcessData);
    GlobalThreadPool.WaitForAll;  // must finish before Free below
  finally
    MyObject.Free;
  end;
end;

3. Indexed procedure (loop parallelism)#

procedure ProcessItem(index: Integer);
begin
  WriteLn('Item ', index, ' in thread ', GetCurrentThreadId);
end;

var
  i: Integer;
begin
  for i := 0 to 9 do
    GlobalThreadPool.Queue(@ProcessItem, i);

  GlobalThreadPool.WaitForAll;
end;

4. Custom pool with error check#

var
  Pool: TSimpleThreadPool;
begin
  Pool := TSimpleThreadPool.Create(4);
  try
    Pool.Queue(@RiskyProcedure);
    Pool.WaitForAll;

    if Pool.LastError <> '' then
      WriteLn('Task failed: ', Pool.LastError);
  finally
    Pool.Free;
  end;
end;

---

Common Pitfalls#

Freeing an object before WaitForAll#

// WRONG — worker thread may still be calling MyObject.ProcessData
MyObject := TMyClass.Create;
GlobalThreadPool.Queue(@MyObject.ProcessData);
MyObject.Free;  // access violation risk

// CORRECT
MyObject := TMyClass.Create;
try
  GlobalThreadPool.Queue(@MyObject.ProcessData);
  GlobalThreadPool.WaitForAll;
finally
  MyObject.Free;
end;

Calling Free on GlobalThreadPool#

// WRONG — the unit's finalization block already does this
GlobalThreadPool.Free;  // double-free at program exit

// CORRECT — just use it; no manual cleanup needed
GlobalThreadPool.Queue(@MyProcedure);
GlobalThreadPool.WaitForAll;

Forgetting WaitForAll#

// WRONG — program may exit before tasks finish
for i := 0 to 99 do
  GlobalThreadPool.Queue(@ProcessItem, i);
// results are incomplete or uninitialized here

// CORRECT
for i := 0 to 99 do
  GlobalThreadPool.Queue(@ProcessItem, i);
GlobalThreadPool.WaitForAll;
// results are now complete

ThreadPool.Simple API Documentation

Thread Pool Types#

GlobalThreadPool#

TSimpleThreadPool#

Queue Overloads#

Type signatures (from ThreadPool.Types)#

WaitForAll#

Error Handling#

Collecting all errors (v0.7.0)#

Reacting to errors as they happen (v0.7.0)#

Lifecycle and submission timeouts (v0.8.0)#

Properties#

Methods#

Usage Examples#

1. Simple procedure#

2. Object method#

3. Indexed procedure (loop parallelism)#

4. Custom pool with error check#

Common Pitfalls#

Freeing an object before WaitForAll#

Calling Free on GlobalThreadPool#

Forgetting WaitForAll#

Type signatures (from `ThreadPool.Types`)#